RTS Halloween Gnome eye balls pumpkin wheelbarrel DTF TRANSFER (HOT PEEL) SIZE 9x12

    Regular Price
    $2.99
    Sale Price
    $2.99
    Regular Price
    Sold Out
    Unit Price
    per 
    - +

    DTF CLEAR FILM TRANSFERS

    Press at 300 degrees Fahrenheit for 10-11 seconds. 60 PSI 5BAR pressure. HOT PEEL

    Our DTF Hot Peel Transfers come ready to press on clear coated film for easy application. Vibrant colors with heavier color spectrum all mixed with a lighter feel on the finished product. We do recommend using a clamshell or swing away heat press.  House hold iron's wont work. A calibrated press also is very crucial as the heat and pressure are sensitive with all DTF.  Don't worry about getting a test transfer because you don't need one with these.  You can press on any color garment 100% cotton/100% polyester/tri-blends and more. Very User Friendly and Eco Friendly being water based. 

    No Washing instructions because we finally have a transfer you can wash and dry! wow that's amazing! Just use the normal care instructions that come with your garments.  Wait 48-72 to wash. Washing inside out and avoiding fabric softeners will extend the life of  the transfer.

    By purchasing you agree that the process for the application of our transfers is your responsibility and we not refund due to user error. There is a learning curve to heat pressing and transfers and every heat press is different. These do not press at any other times and temps, So pressing at anything but the set time and temp will result in failed transfer.     We stand behind our products and would not sell something without extensively testing our own products in house before allowing them to be sold.      The hot peel is just that.    This isn't cold peel. No need to remove garments and cool.. Press give it 3-4 seconds so you don't melt your fingers and peel.

    Thank you :)

    Applying our transfers is super simple. Follow the steps and instructions below to achieve perfect results on your next project!


     No Teflon Sheets, Covers or Pillows. 

    Never use teflon sheets, covers or pillows with any of our plastisol formulas. They dissipate the heat too much, resulting in a poorly applied transfer.

    Calibrate Your Heat Press. ACCURATE HEAT

    You will need to use a quality LAZER Temperature Gun to ensure your heat press is heating evenly and accurately. You should do this each and every time you start a new pressing cycle.

    PRESS THE LIFE OUT!! 60LBS

    Plastisol transfers will give you a quality and long-lasting decoration solution, but you HAVE to ensure you are using adequate and even pressure. This will ensure the formula properly adheres to your garment. Not using enough pressure can result in poorly applied plastisol transfers.

    Water resistant, waterproof, and fireproof garments:

    We recommend testing a sample on your item before production. Water resistant, waterproof and fireproof garments may not accept a heat transfer application. FR chemicals are known to create adhesions issues while pressing to the garment.

    OUR FORMULA FOR CFXlite CLEAR FILM SCREENS *CPSIA COMPLIANT* 

    NO TEFLON SHEETS, COVERS or PILLOWS 

    Temperature: 300 Degrees Fahrenheit 
    Time:   10-12 Seconds 
    Pressure: High Pressure (8-9 Manual, 60PSI Automatic) 
    Peel: Hot Peel "WATCH YOUR FINGERS FILM CAN BE VERY HOT"

     OUR DTF PROCESS

    NO TEFLON SHEETS, COVERS or PILLOWS 

    Temperature: 295- 300 Degrees Fahrenheit 
    Time:   10-12 Seconds 
    Pressure: High Pressure (8-9 Manual, 60PSI Automatic) 
    Peel: Hot TO Warm Peel  (PEELING FROM ONE CORNER TO THE OTHER) "WATCH YOUR FINGERS FILM CAN BE VERY HOT"

     

     

     

     

     

     

     

     

     

     

     OUR HTV  PROCESS

    NO TEFLON SHEETS, COVERS or PILLOWS 

    First weed your image. Remove all excess pieces. Then apply clear transfer sheet "really sticky"  apply this to the top of the image fanning it with squeegee type motion, remove the back of the image which is what the image was printed on. Now your image will be on the clear transfer sheet for your placing.

    Temperature: 310 Degrees Fahrenheit  
    Time: 15 Seconds  
    Pressure: Medium Pressure (6-8 Manual, 50PSI Automatic)  
    Peel: Hot Peel THE MASK SHEET IS RE-USABLE 10+ TIMES

    OUR SUBLIMATION PROCESS

    NO TEFLON SHEETS, COVERS or PILLOWS 

    Temperature: 385 Degrees Fahrenheit  
    Time: 30 Seconds  
    Pressure: Medium Pressure (6-8 Manual, 50PSI Automatic)  
    Peel: Hot Peel " WATCH FOR DRIFTING OF PAPER"

     

    @doityourselftransfers A few tips and tricks for DTF transfers. Please keep in mind our DTF transfers are normally pressed at 300 degrees HOT PEEL. ☺️ #dtftransfers #fyp #instructions ♬ original sound - Doityourselftransfers

     

    Subscribe to our newsletter

    Signup for our newsletter to stay up to date on sales and events.

    *By completing this form you're signing up to receive our emails and can unsubscribe at any time